Working with HP DesignJet , Z3100, Z3200ps, Z Series Printers
USING HP Z3200
Mark Lindquist 12/10/2014 - updated --1-03-2017
Z3200 PRINTERS -
WORKING WITH OTHER COMMERCIALLY AVAILABLE PAPERS
The chart below (and the link above) show the
specific settings for working with HP Papers and papers from third
parties. This is a hugely important chart, which helps in
understanding critical settings when creating custom profiles.
*NOTE that the chart indicates the 6 specific
papers/presets that use QUAD inks in red.
Also, the chart represents what can be used on the Z3200 and Z3200
ORIGINAL PAPER PRESET LIST GOING BACK
TO HP Z3100
OLD HP document that discusses working
with paper presets with the Z3100 Printer from 2007
An original HP Tech Newsletter for Z3200 - "Working with Other
Newsletter: Working with Non-HP Papers - (Z3100 - June 2007) -
Note* The above old HP Documents are archived here for
educational purposes only and may be subject to copyright.
(These are my own personal notes from
repairs I have made. I have made this web page for my own benefit, so I
have a record of what I have done. If you use this information, do so at
your own risk - I assume no responsibility for errors.)
Above: The Lindquist print studio with 3 HP Z Series printers, 3200 and
A fourth Z Series printer is in another room. The third Z3200ps is
set up in the photo - notice the ink and printheads on table.